Flagship of the Audioaccess product line, the Audioaccess PX-700 Multiroom Audio Controller forms the heart of a superiorsounding, easy-to-use multiroom audio system. This powerful system is easily set up with the PX-700 Installation Manager, Audioaccess’s proprietary Windows® application. The PX-700 continues our long tradition of easy-to-use and easy-to-install multiroom systems, and adds powerful source control, programming flexibility and customizable features. An all-new audio preamplifier circuit, designed and manufactured in the USA, delivers the performance associated with high-quality, seperate audio components. Features

	Simple, intuitive operation
	Easy installation
	Separate-component-quality audio performance
	Adjustable input levels for each source
	Independent bass and treble levels for each PX-700 room
	Convenient, expanded programming via PC or laptop
	Create and maintain extensive IR library
	Import/export utilities for merging/updating master library
	Rack-mountable chassis when used with Middle Atlantic RSH Series rack mounts. Download the attached Product Information Sheet for additional specifications.
	Eight audio inputs plus a paging input for each zone
	Front-panel IR receiver, rear-panel IR In/Out Jacks
	Built-in RS-232 interface accessible from either front or rear panel
	Built-in IR learning device
	Zone-linking capabilities
	Any five of eight sources available from KPS101 Keypad in each zone
	Eight sources available from touchscreens and handheld remotes
	Selectable turn-on source in each zone
	Each zone assignable to one of three ALL ON groups (or none)
	Expandable to 36 zones with additional PX-700 controllers
	Compatible with PX-603 Multiroom Expander (add up to three rooms per zone)
	Compatible with Audioaccess multiroom, 12-channel amplifiers

Additional Specifications

Audio
	Connector: gold-plated RCA jack
	Input Impedance: 20kOhm
	Maximum Input Level (for 0.1% THD+N at any output): 2.0VRMS
	Output Impedance: 330 Ohm
	Maximum Output Level Source-Buffered Outputs: 2.0VRMS Primary Outputs: 2.75VRMS Expansion Outputs: 2.0VRMS
	Gain Source-Buffered Outputs: 0dB (unity gain) Primary Outputs: 18.5dB (volume set at 100) br>Expansion Outputs: –1dB
	S/N (Input: 2.2VRMS, 1kHz, primary room volume at unity gain; Measurement Bandwidth: 22kHz) Source-Buffered Outputs: >113dB Primary Outputs: >95 dB Expansion Outputs: >100dB
	Frequency Response Source-Buffered Outputs: 10Hz to 110kHz, ±1dB Primary Outputs: 10Hz to 70kHz, ±1dB Expansion Outputs: 10Hz to 75kHz, ±1dB
	THD + Noise (Input: 1VRMS, 1kHz, primary room volume at unity gain; Measurement Bandwidth: 30kHz) Source Buffered Outputs: <0.003% Primary Outputs: <0.006% Expansion Outputs: <0.005%
	L/R Crosstalk (at 1kHz) Source-Buffered Outputs: <–110dB Primary Outputs: <–92dB Expansion Outputs: <–104dB
	Source-to-Source Crosstalk (at 1kHz, any two sources) Source-Buffered Outputs: <–110dB Primary Outputs: <–100dB Expansion Outputs: <–105dB
	Volume Control: 0 to 100dB in 0.5dB steps
	Bass: shelving type, ±12dB in 2dB steps at 100Hz
	Treble: shelving type, ±12dB in 2dB steps at 10kHz
Trigger Inputs and Outputs
	Connector: 3.5mm Mini Phone Jack
	Trigger Out and Zone Trigger Output Voltage: 8 to 16VDC (depending on line voltage and load), tip positive
	Page Trigger In: dry contact
	Trigger In: 4 to 30VDC, tip positive;3 to 24VRMS AC
Power Inlet
	Connector: male IEC320
	Power Requirement: 115V AC, 50/60Hz, 50 watts (not including switched outlet) 230V version power ment is 230V AC, 50/60Hz, 50 watts; switched outlet connector is female IEC320.
Switched Outlet
	Connector: NEMA 5-15R*
	Maximum Load: 300 watts
Inputs
	Eight stereo audio inputs with buffered loopthru capability
	One mono page input
	Trigger input allows sharing of audio sources with other systems
	Four-conductor keypad input
	PC Link jack RS-232 interface on front panel
	Nine-pin D-sub RS-232 interface on back panel
Outputs
	Six-room preamp outputs (one per zone)
	Six independent fixed outputs
	One record output from the main zone
	Six programmable 12VDC trigger outputs (one per zone)
	Eight dedicated IR source outputs
	One all-IR source output
Dimensions
	Dimensions	17-5/16" W x 4" H x 15-1/2" D (440mm x 102mm x 394mm) (includes connectors and feet)
	Weight	11.5lb (5kg)

Manuals

	Information Sheet: Rack Mount Kits for Audioaccess	LINK
	Product Literature: PX-700 Product Information Sheet	LINK
	IR Library - Master December 2006	LINK
	IR Library: AA Master. Updated June 16, 2006. Adds iPod, Russound ST2 and discrete ReQuest codes.	LINK
	Two Year Electronics Warranty	LINK

Accessories

	Audioaccess aDock™	iPod® Docking Station With Multiroom Audio and Control Interface
	CATC	Color Audioaccess® Touchscreen Controller
	CATC/2WSI	Two Way Intelligent Serial Interface for CATC
	KPS101	Eight Button In-Wall Keypad for PX-700 System
	PCLINK	PC Link Cable for PX-700
	PDM	Page/Doorbell Module for PX-600 and PX-700
	RT700	Full-Function Remote Control for PX-700