The Page Doorbell Module (PDM) is used to generate chimes and/or route page audio through selected zones in an Audioaccess system. The PDM generates two independently triggered doorbell chimes and has two page audio inputs. The doorbell chimes and page audio are routed to the Audioaccess system PAGE AUDIO INPUT. When the PDM senses either a page audio or doorbell chime it feeds a mute signal to the Audioaccess system. The Audioaccess system then routes the doorbell chime or page audio to the correct zones, mutes the zones as necessary and plays the doorbell chime/page audio at the correct volume as the installer has set in the set up software for the system. The Audioaccess system can be set to page when zone is on, page when zone is off, always page, and never page, as well as volume level on a per zone basis. Features

	The Page and Doorbell Module (PDM), used in conjunction with an Audioaccess system, will generate doorbell chimes and/or route paging audio through selected zones at selected volumes.
	There are two doorbell triggers and two paging audio inputs.
	The generated doorbell chime audio and the paging audio are mixed together and fed into the Audio Page Input on the controller along with a separate MUTE trigger.
	The two doorbell inputs can be triggered in three ways: 1) contact closure, 2) voltage (10-24VAC), or 3) the output of a Panasonic Doorphone
	The level-sensing audio inputs for paging are designed to accept a line level, mono, audio signal (1.0V RMS) on a mono 1/8" (3.5mm) plug
	A 12VDC power supply and the two cables used to connect the MUTE trigger and the AUDIO signal to the controller are provided.

Manuals

PDM Installation Manual

LINK