Products & Systems
PX-800 Audioaccess® Multiroom Audio Controller View: Larger Image
Zoom In: Front | Back
Flagship of the Audioaccess product line, the Audioaccess PX-800 Multiroom Audio Controller forms the heart of a superior sounding, easy-to-use multiroom audio system. This powerful system is easily set up with the PX-800 Installation Manager, Audioaccess’s proprietary Windows® application. The PX-800 continues our long tradition of easy-to-use and easy-to-install multiroom systems, and adds powerful source control, programming flexibility and customizable features. An all-new audio preamplifier circuit, designed and manufactured in the USA, delivers the performance associated with high-quality, separate audio components. Features
hide Simple, intuitive operation
hide Easy installation
hide Separate-component-quality audio performance
hide Per zone volume control, EQ, tone, and balance controls
hide Convenient, expanded programming via PC or laptop
hide The PX-800 may be rack-mounted using the supplied 2U adapters
hide 16 audio inputs available for each of 16 zones
hide Low-pass filter and 2.1 zone grouping feature for adding a subwoofer to any zone
hide Front-panel IR receiver, rear-panel IR In/Out Jacks
hide Built-in RS-232 interface accessible from the rear panel
hide Built-in RJ-45 jack for IP control rom the rear panel
hide Zone-linking capabilities
hide Any of eight sources available from KPS101 Keypad in each zone when used with CPC-800 control protocol converter
hide Sixteen (16) sources available from 3rd party touchscreens and handheld remotes including Control 4, RTI, URC, Crestron and others
hide 12-volt trigger output to turn on associated amplifiers.
hide Signal Sensing amplifier turn-off via trigger output.
hide Each zone assignable to one of ten groups (or none)
hide Expandable to 32 zones with an additional PX-800 controller
hide Compatible with ATI AT6012 (and other) multiroom, 12-channel (or other) amplifiers
Additional Specifications
Audio
hide Connector: gold-plated RCA jack
hide Input Impedance: 100 kOhm
hide Maximum Input Level
(for 0.1% THD+N at any output): 2.0VRMS
hide Maximum Output Level
Source-Buffered Outputs: 2.0VRMS
Primary Outputs: 2.75VRMS
hide S/N (Input: 2.2VRMS, 1kHz, primary
room volume at unity gain;
Measurement Bandwidth: 22kHz)
Source-Buffered Outputs: >82 dB
hide Frequency Response
Source-Buffered Outputs: 10Hz to 25 kHz, ± +/- 1 dB
hide THD + Noise (Input: 1VRMS, 1kHz,
primary room volume at unity gain;
Measurement Bandwidth: 30kHz)
Outputs: <0.02%
hide L/R Crosstalk (at 1kHz)
Outputs: <–-85 dB
hide Bass: shelving type, ±+/- 12 dB in 2dB steps at 100Hz
hide Treble: shelving type, ± +/- 12 dB in 2dB steps at 10kHz
 
Trigger Inputs and Outputs
hide Connector: 3.5mm Mini Phone Jack
hide Trigger In: 4 to 30VDC, tip positive;3 to 24VRMS AC
 
Power Inlet
hide Connector: male IEC320
hide Power Requirement: 115V AC, 50/60Hz, 30 watts
 
Inputs
hide 16 stereo audio inputs
hide Rear-panel USB input
hide Four-conductor RJ-45 input
hide Nine-pin D-sub RS-232 interface on back panel
 
Outputs
hide 16-room preamp outputs (one per zone)
hide 12VDC trigger outputs
hide One all-IR source output
 
Dimensions
hide Dimensions16 1/4" W; D x 8 1/4" H x 3 1/2" D
(413mm x 210mm x 89mm)
(includes connectors and feet)
hide Weight10 lbs. (4.55 kg)
Manuals Downloads

© 2011- 2013 Audioaccess. All rights reserved.