The Audioaccess MA-362 12-Channel Amplifier represents a high-value approach while providing 12 channels of clean amplifier power for multiroom system applications. Power to Spare: With a power rating of 50 watts per channel at 8 ohms from 20Hz to 20kHz with less than .05% THD, the MA-362 will drive virtually any loudspeaker to room-filling volume. Power into 4 ohms is even more impressive at 75 watts per channel. All channel pairs may be bridged if additional power is required. Cool operation is ensured with a design incorporating heatsinks, flow-through ventilation and low-noise fans. Features

	Rack-mountable chassis
	Discrete amplifier design for improved sound quality
	Signal Input Connector: six dual RCA jacks
	Four-position switch to select Stereo, Bridged Right, Bridged Left or Mono operation for each zone
	Independent level controls for each amp channel
	Signal Link Selector: two-position switch to link a zone to the signal input connector of the zone to its left (excluding zone 1)
	Trigger Source Selector: three-position switch to select signal sensing, voltage trigger input or link (to the trigger signal of the zone to the immediate left) to control muting in the zone
	Trigger Input, Euro-style connector, accepts 3V to 24V AC or DC, to "unmute" amp channels in the zone
	Plug-in Speaker Termination Board
	Power Switch on front panel
	Bi-color LED Power Indicator

Additional Specifications

General
	Number Of Channels	12, configured as 6 left/right pairs (zones)
	Power Output (Unbridged)	50W @ 8Omega, 75W @ 4Ω, 20Hz – 20kHz, all channels driven
	Power Output (Bridged)	150W @ 8Ω, 20Hz – 20kHz, all channels driven
	THD + Noise	<0.05%, at rated power, 20Hz – 20kHz
	IMD	<0.05% (SMPTE)
	Frequency Response	20Hz – 20kHz, +0/–0.2dB, at rated power, 4Ω load
	Bandwidth	5Hz – 75kHz, +0, –3dB, at rated power, 4Ω load
	S/N	>100dB unweighted (ref: rated power), unbridged into 8Ω
	Crosstalk	<–70dB (ref: maximum output) between any two channels (no audible crosstalk)
	Protection	short circuit, overcurrent, DC, Thermal
	Muting	turn-on, turn-off, signal sensing and triggered per zone
	Input Impedance	24kΩ
	Input Sensitivity	1.0Vrms (with input trim at minimum attenuation)
	Input Level Trim Range	20dB
	Gain	26dB
	Dimensions (H x W x D)	17-11/16"W* x 7"H** x 17-11/16"D (450mm x 178mm x 450mm) *Front-panel width is 19" (483mm) **4 rack spaces high, not including feet
	Weight	60 lb (27.2kg) (without carton)

Manuals
Listed below are current links for the AT6012

© 2011- 2013 Audioaccess. All rights reserved.

	AT6012 Product Information	LINK
			Seven Year Electronics Warranty	LINK